Aug 26, 2008, 9:34AM I've been reading Power's "My AP Solution" on motor vibration with interest and thought rather than hijack his thread I would start a new thread on what motors people have had success using for AP. What makes a motor vibrate? [#]

Aug 27, 2008, 9:21AM I am experiencing strange probem with my HBK2. It has now very strong tendency to tilt left. Even maximal trim to the right doesn't take care of that. I removed main blades and I have noticed that when spinning up heli, flybar is tilted to the left. [#]

Aug 27, 2008, 6:19PM This is distrurbing....................http://www.inews3.com/play.php? [#]

Aug 27, 2008, 4:16PM Deans connectors suck and i will never use them again! They are getting worse and worse. Give me a traxxas connector or some sermos power poles. [#]

Aug 27, 2008, 1:42AM Introduction: One of my favorite helicopters of all time has been the Hughes 500 and so I am always drawn at models that are done in a close approximation to the real thing. I had seen the Kestrel "coaxial" H500 theme, on the internet before the... [#]

Aug 26, 2008, 2:03PM Hey guys. Any suggestions for a non-3D front yarder? I've got plenty of 6mm, and a little bit of 3mm and 2mm Depron, a 10gm HC outrunner teamed with a 2S 500mAh Lipo. Need something nice and floaty and RET. Any thoughts greatly appreciated. [#]

Aug 27, 2008, 11:52PM I bought a GWS dual conversion receiver. It was DOA. I sent this in to GWS the beginning of March (covered under warranty). After MANY, MANY emails all I am receiving from them is "The company has not shipped us any receivers. [#]

Aug 27, 2008, 11:45AM I have been flying at the high school soccor fields. It is a great place to fly and is surounded by fields and forest. It is also a good thousand yards from the school itself and I have been thinking about approaching the school to get "sanctioned" in an ... [#]

Aug 27, 2008, 7:49PM OK guys, this will be my last Summer of Space design. It is also my most ambitious. This is actually by request of my Dad. He was out at Oshkosk and saw the new Jetpack there and i figure that JetPacks are certainly Spacey! One motor, 2 props. [#]

Aug 26, 2008, 5:47PM ive seen these, and ones blue, and ones a nice grey? whats the difference and why can i not find any grey ones for sale? and is there a rtf version with left and right trigger control, not just the single control shown. thanks. [#]

Aug 27, 2008, 5:09PM Hey guys... I have 2 14.8v 1800mah batteries. I want to run a 4 cell system in my plane but i need at least 2500+mah. If i wire the 2 battery's together (red to red, black to black) will it preform like a 14.8v 3600mah battery? Also... [#]

Aug 27, 2008, 2:33PM No bananna plugs in a 130 dollar charger? [#]

Aug 26, 2008, 10:56PM Or do we have to cover it first such as spackling? I don't have any spare eps to try so I want to make sure before I do it. [#]

Aug 26, 2008, 11:58AM Just open up the JR DSX9 and just realize it do not have a Ball Bearing on Gimbal.... I opened it up to Swap the Flight Mode Switch from the left and move it to the right side, so that it will be same with my Specktrum DX7. [#]

Aug 27, 2008, 6:23AM Ok all you JR experts here's a problem that has me so frustrated I want to smash both of these into bits! First things first, I'm not new and I reviewed both instruction manuals tonight and still can't fix this. [#]

Aug 27, 2008, 5:51AM Does anyone know how to solder this lipo to the losi connectors? I know the orange wire goes to negative and blue wire goes to positive, but where do I solder it on the battery? Do I have to cut open where the 2 rectangular piece that sticks out and... [#]

Aug 27, 2008, 1:36AM I purchased 380X, which heated 4in1 and puffed a Lipo. (It was 9T with stock blades, will try with 8T/9T with stock/M24). I have Slo-Max on the way. Good Main motor characteristics: 1. More power 2. Does not shorten flight time 3. [#]

Aug 27, 2008, 6:48PM Hello People! I want to upgrade from my coax's, (have Walk 5G6 & Lama V3), been doing some research and want to get some feed back form the knowledgeble folks on this message board. I really enjoy takin gmy Lama outside so I want something with a bit... [#]

Aug 28, 2008, 1:00AM Well is there any receiver ready beginner heli that can do mild 3D with gyro bar jamming up im new to helis so it would nice to be stable and/or is there the e-sky duphla receiver ready version got Dx6I Oh and yes i do fly warbirds... [#]

Aug 27, 2008, 5:35PM Hi guys, I am relatively new to RC. I have flown 3 channel helis and 3ch planes before, but that's it. (I used to have a Parkzone Cub, then I got out of flying for a while) I'm looking for a relatively docile plane. [#]